Object and scope
This standard specifies the dimensions and tolerances for hot rolled flat steels of at least 4 mm. thickness and 150 mm. to 1250 mm. width.
Dimensional tolerances table
| Profile |  |
||
| Standard | DIN 59200 A | ||
| Dimension, mm. | Tolerance, mm. | ||
| Thickness (Width >150 mm.) | |||
| ≥ 4 | < 10 | -0.4 | +0.6 |
| ≥ 10 | < 20 | -0.4 | +0.8 |
| ≥ 20 | < 25 | -0.5 | +0.9 |
| ≥ 25 | < 30 | -0.6 | +1.0 |
| ≥ 30 | < 40 | -0.7 | +1.1 |
| ≥ 40 | < 50 | -0.9 | +1.1 |
| ≥ 50 | < 60 | -1.0 | +1.2 |
| ≥ 60 | < 80 | -1.0 | +1.6 |
| ≥ 80 | – | -1.0 | +3.0 |
| Width | |||
| >150 | ±2 % max. ±10mm. | ||